tfs380.doc
version 3.0
09.03.2000
VI
TELEFILTER
Filter specification
TFS 380
1/5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail:
tft@telefilter.com
E-Mail:
vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Measurement Condition
Ambient Temperature:
23
°
C
Input Power Level:
0
dBm
Source impedance:
50
Load impedance:
50
Terminating impedances:
input:
820
|| -4,0 pF
output:
1,3 k
|| -4,3 pF
Characteristics
Remark:
Reference level for the relative attenuation arel is minimum pass band attenuation a
min.
It is defined as the insertion loss ae. The nominal frequency
fN is fixed to 380,0 MHz. The given values for the insertion loss, the relative attenuation arel and the group delay ripple have to be reached at the
frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature
range and due to a production tolerance for the centre frequency fc.
D a t a
typ. Value
Limit
Insertion Loss
a
e
= a
min
13
dB
max.
16
dB
(Reference level)
Nominal Frequency
f
N
-
380,0 MHz
1 dB - Bandwidth
BW
4,6
MHz
min. 4,0 MHz
Relative Attenuation
arel
fN ...
fN ±
2,0 MHz
0,5
dB
max.
1
dB
fN
±
4,0 MHz ... fN
±
16,0 MHz
35
dB
min.
30
dB
fN
±
16,0 MHz ... fN
±
30,0 MHz
40
dB
min.
35
dB
fN
±
30,0 MHz ... fN
±
250,0 MHz
50
dB
min.
40
dB
Pass Band Ripple
fN ± 2,0 MHz
0,5
dB
max.
1
dB
Group delay ripple
fN ± 2,0 MHz
50
ns
max. 100
ns
Phase linearity
fN ± 2,00 MHz
1,2
°rms
max.
4,0 °rms
Operating Temperature Range
- 10 °C ... + 85 °C
Storage Temperature Range
- 40 °C ... + 85 °C
Temperature coefficient of frequency TC
0,036 ppm/K²
Frequency inversion temperature
+ 30
°
C
Generated:
Checked / approved:
tfs380.doc
version 3.0
09.03.2000
VI
TELEFILTER
Filter specification
TFS 380
2/5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail:
tft@telefilter.com
E-Mail:
vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Construction and pin connection
N10
S 380
Datecode
50
test circuit
Input
SAW
L1
C2
C1
Output
L2
C4
C3
10
4
1
Ground
2
Ground
3
Output RF Return
4 Output
5
Ground
6
Ground
7
Ground
8
Ground
9
Input RF Return
10 Input
11
Ground
12 Ground
Datecode:
Year+week
L
1999
M
2000
N
2001
...
tfs380.doc
version 3.0
09.03.2000
VI
TELEFILTER
Filter specification
TFS 380
3/5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail:
tft@telefilter.com
E-Mail:
vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Stability Characteristics:
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
25 °C to 55°C / 95% r.H. / 10 cycles
(cycle)
DIN IEC 68 - 2 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing:
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type
II
,
embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
3000
Reel of empty components at start:
min 300 mm
Reel of empty components at start including leader:
min 500 mm
Trailer
min 300 mm
D
o
P
o
E
F
W
P
1
EMBOSSED CARRIER TAPE
COVER TAPE
G
P
2
B
o
A
o
Ct
D
1
Tape (all dimensions in mm)
W : 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,1
E : 1,75 ± 0,1
F : 7,5 ± 0,1
G (min) : 0,6
P2 : 2 ± 0,1
P1 : 8 ± 0,1
D1(min) : 1,5
Ao : 5,5 ± 0,1
Bo : 7,5 ± 0,1
Ct : 13,5+/-0,1
A
C
N
W 1
W 2
Reel (all dimensions in mm):
A : 330
W 1 : 16,4 +2
W 2 (max) : 22,4
N (min) : 50
C : 13 +/- 0,1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is readable if the sprocket holes are on the left side of the tape, i.e. pin 1 identifier is close to the
sprocket holes.
tfs380.doc
version 3.0
09.03.2000
VI
TELEFILTER
Filter specification
TFS 380
4/5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail:
tft@telefilter.com
E-Mail:
vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Air reflow temperature conditions
1st and 2nd air reflow profile
Name: pre-heating periods main-heating periods peak temperature
Temperature:
150 °C - 170 °C
over 200 °C
255 °C ± 5 °C
Time:
60 sec. - 90 sec.
20 sec. - 25 sec.
Air reflow profile
0
20
40
60
80
100
120
140
160
180
200
220
240
260
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
temperature / °C
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec. temperature / °C time / sec. temperature / °C
0
23
140
160
10
34
150
161
20
46
160
164
30
60
170
170
40
80
180
180
50
103
190
205
60
121
195
230
70
134
200
255
80
143
205
230
90
150
210
205
100
154
215
180
110
156
220
165
120
158
230
140
130
159
240
120
tfs380.doc
version 3.0
09.03.2000
VI
TELEFILTER
Filter specification
TFS 380
5/5
VI TELEFILTER
Vectron International, Inc.
Potsdamer Straße 18
267 Lowell Road
D 14 513 TELTOW / Germany
Hudson, NH 03051 / USA
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail:
tft@telefilter.com
E-Mail:
vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
History
Version
Reason of Changes
Name
Date
Development specification
1.0
new specification
Steiner
31.05.2000
2.0
stopband attenuation decreased
Steiner
22.09.2000
Filter specification
3.0
specification extended
Steiner
09.03.2000
- terminating impedances added
- stability characteristics, tape and reel information air reflow profile added
- loss definition changed to loss= minimum insertion loss in passband
PDF 
ZIP