1
SLD433S4
M-S207
60W Array Laser Diode
Description
The SLD433S4 is a high power laser diode with
an array structure, which achieves 60W high power.
The package is high efficiency water cooling package.
Module customizing is available.
Features
· High power
Recommended optical power output: Po = 60W
· Array structure
· Open package
· High efficiency water cooling package
Applications
Solid state laser excitation
Structure
AlGaAs quantum well structure laser diode
Absolute Maximum Ratings (Tw = 25°C Tw: cooling water tempareture)
· Optical power output
Pomax
66
W
· Reverse voltage
V
R
LD
2
V
· Operating temperature (Tw) Topr
10 to +30
°C
· Storage temperature
Tstg
10 to +60
°C
· Storage humidity
No dew condensation
Operating Lifetime
MTTF 10,000H (effective value) at Po = 60W, Tw = 25°C
PE05125
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
Preliminary
3
SLD433S4
Notes on Operation
Care should be taken for the following points when using this product.
(1) This product corresponds to a Class 4 product under IEC60825-1 and JIS standard C6802 "Laser Product
Emission Safety Standards".
(2) Eye protection against laser beams
Take care not to allow laser beams to enter your eyes under any circumstances.
For observing laser beams, ALWAYS use safety goggles that block laser beams. Usage of IR scopes, IR
cameras and fluorescent plates is also recommended for monitoring laser beams safely.
(3) Gallium Arsenide
This product uses gallium arsenide (GaAs). This is not a problem for normal use, but GaAs vapors may be
potentially hazardous to the human body. Therefore, never crush, heat to the maximum storage temperature
or higher, or place the product in your mouth.
In addition, the following disposal methods are recommended when disposing of this product.
1. Engaging the services of a contractor certified in the collection, transport and intermediate treatment
of items containing arsenic.
2. Managing the product through to final disposal as specially managed industrial waste which is
handled separately from general industrial waste and household waste.
(4) Prevention of surge current and electrostatic discharge
Laser diodes are most sensitive to electrostatic discharge among semiconductors. When a large current is
passed through the laser diode for even an extremely short time, the strong light emitted from the laser
diode promotes deterioration and then destruction of the laser diode. Therefore, note that surge current
should not flow to the laser diode driving circuit from switches and others. Also, if the laser diode is
handled carelessly, it may be destroyed instantly because electrostatic discharge is easily applied by a
human body. Therefore, be extremely careful about overcurrent and electrostatic discharge.
(5) Use for special applications
This product is not designed or manufactured for use in equipment used under circumstances where
failure may pose a risk to life and limb, or result in significant material damage, etc.
Consult your Sony sales representative when investigating use for medical, vehicle, nuclear power control
or other special applications. Also, use the power supply that was designed not to exceed the optical power
output specified at the absolute maximum ratings.
LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
LASER DIODE
LASER DIODE
AVOID EXPOSURE
Laser radiation is
emitted from this
aperture.
This product complies with 21
CFR Part 1040.10 and 1040.11
Sony Corporation
6-7-35 Kitashinagawa,
Shinagawa-ku,Tokyo
141-0001 Japan
MAXIMUM OUTPUT
OVER 1
W
WAVELENGTH
600 - 950 nm
CLASS IV LASER PRODUCT
PDF 
ZIP
