LA1-04032C-1
NOTICE
This publication is the proprietary of SHARP and is copyrighted, with all rights reserved. Under the copyright laws,
no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical for
any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is
also required before any use of this publication may be made by a third party.
The application circuit examples in this publication are provided to explain the representative applications of SHARP's
devices and are not intended to guarantee any circuit design or permit any industrial property right or other rights to be
executed. SHARP takes no responsibility for any problems related to any industrial property right or a third party
resulting from the use of SHARP's devices, except for those resulting directly from device manufacturing processes.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that
occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to
obtain the latest device specification sheets before using any SHARP's device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structures and other
contents described herein at any time without notice in order to improve design or reliability. Contact SHARP in order
to obtain the latest specification sheets before using any SHARP's device. Manufacturing locations are also subject to
change without notice.
Observe the following points when using any device in this publication. SHARP takes no responsibility for damage
caused by improper use of the devices.
The devices in this publication are designed for
general electronic
equipment use.
The appropriate design measures should be taken to ensure reliability and safety when SHARP's devices are used for
equipment such as:
Transportation control and safety equipment(i.e.,aircraft, trains, automobiles, etc.)
Traffic signalsGas leakage sensor breakers Alarm equipmentVarious safety devices etc.
SHARP's devices shall not be used for equipment that requires extremely high level of reliability, such as:
Military and space applications Nuclear power control equipment
Medical equipment for life support
Contact a SHARP representative, in advance, when intending to use SHARP's devices for any "specific" applications
other than those recommended by SHARP.
Contact and consult with a SHARP representative if there are any questions about the contents of this publication.
LA1-04032C-2
1
Applicable TFT-LCD module
This specification applies to the color TFT-LCD module, LQ064V3DG01.
2
Overview
This module is a color active matrix transmissive LCD module incorporating amorphous silicon TFT (Thin
Film Transistor).
It is composed of a color TFT-LCD panel, driver ICs, control circuits and power supply circuitry and a
backlight unit. Graphics and texts can be displayed on a 640 x RGB x 480 dots panel with 262,144 colors by
feeding 18 bit data signal (6bit/each of R,G,B), 4(four) timing signals, +3.3V or +5V DC power supply for
TFT-LCD and AC power supply for backlight.
(Note: Backlight-driving DC/AC inverter is not built in this module.)
Fine images with stripe aligned 307,200 pixels on 6.4 inch diagonal screen
Color display capability of 262,144 colors with 18 bit data signal(6 bits for each RGB)
Adapting a wide viewing angle technology [best viewing angle: 6 o'clock direction]
High contrast, thanks to active matrix drive system
AG(Anti Glare) polarizing filter
Light and slim compact module achieved by COG assemble technology12 o'clock direction is also
available by the function to flip the screen horizontally or vertically)
Natural coloring reproducibility by employing normally-white-mode, which has good nature in coloring
Image inversion both horizontally and vertically
3
Mechanical Specifications
items specifications
unit
Display size (Diagonal)
16.32 (6.4")
cm
Active display area
130.56 (H) x 97.92 (V) mm
Pixel format
640(H) x RGB x 480(V)
dot
(1 pixel=R+G+B dots)
-
Pixel pitch
0.204 (H) x 0.204(V)
mm
Pixel configuration
R,G,B vertical stripe
-
LCD mode
Normally white/Twisted Nematic
-
Dimension *
161.3 (W) x 117 (H) x 12(D)
mm
Mass
280max g
*. Protrusion such as backlight harness and positioning boss are not included.
Fig.1 shows dimensions of the module.
PDF 
ZIP
