DS07-12519-2E
FUJITSU SEMICONDUCTOR
DATA SHEET
8-bit Proprietary Microcontroller
CMOS
F
2
MC-8L MB89660 Series
MB89663/665/P665/W665
s
DESCRIPTION
The MB89660 series has been developed as a general-purpose version of the F
2
MC*-8L family consisting of
proprietary 8-bit single-chip microcontrollers.
In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions such as
timers, a UART, a serial interface, an 8-bit A/D converter, an input capture, an output compare, and an external
interrupt. The MB89660 series is applicable to a wide range of applications from welfare products to industrial
equipment.
*: F
2
MC stands for FUJITSU Flexible Microcontroller.
s
FEATURES
· Package expansion
QFP package
SDIP package
(Continued)
s
PACKAGE
64-pin Plastic SH-DIP
(DIP-64P-M01)
64-pin Plastic QFP
(DIP-64C-A06)
64-pin Ceramic SH-DIP
(FPT-64P-M06)
MB89660 Series
2
(Continued)
· F
2
MC-8L family CPU core
Multiplication and division instructions
16-bit arithmetic operations
Test and branch instructions
Bit manipulation instructions, etc.
· Three types of timers
8-bit PWM timer
8/16-bit timer/counter
20-bit time-base timer
· Functions that permit communications with a variety of devices
UART which permits selection of synchronous/asynchronous communications
A serial interface that permits selection of the transfer direction
· 8-bit A/D converter: 8 channels
Sense mode function capable of performing compare operation in 5
µ
s
Activation by external input possible
· Real-time control
Input capture: 2 channels
Output compare: 2 channels
· External interrupt: 4 channels
Two channels are independent and capable of wake-up from low-power consumption modes (with an edge
detection function).
· Low power consumption modes
Stop mode (Oscillation stops to minimize the current consumption.)
Sleep mode (The CPU stops to reduce the current consumption to approx. 1/3 of normal.)
Hardware standby mode (Wake-up from this mode and activation by pin input only.)
Instruction set optimized for controllers
MB89660 Series
3
s
PRODUCT LINEUP
(Continued)
MB89665
MB89W665
MB89P665
Classification
Mass production products
(mask ROM products)
EPROM product
One-time PROM product,
also used for evaluation
ROM size
8 K
×
8 bits
(internal mask ROM)
16 K
×
8 bits
(internal mask ROM)
16 K
×
8 bits
(internal PROM,
programming with
general-purpose
EPROM programmer)
16 K
×
8 bits
(internal PROM,
programming with
general-purpose
EPROM programmer)
RAM size
256
×
8 bits
512
×
8 bits
CPU functions
Number of instructions:
136
Instruction bit length:
8 bits
Instruction length:
1 to 3 bytes
Data bit length:
1,8, 16 bits
Minimum execution time:
0.4
µ
s/10 MHz
Interrupt processing time:
3.6
µ
s/10 MHz
Ports
Output ports (CMOS):
8
Output ports (N-ch open-drain):
8 (All also serve as peripherals.)
I/O ports (CMOS):
36 (19 ports also serve as peripherals.)
Total:
52
8-bit PWM timer
8-bit reload timer operation (toggled output capable, operating clock cycle: 0.4
µ
s, 6.4
µ
s, 25.6
µ
s)
8-bit resolution PWM operation (conversion cycle: 102
µ
s, 1.6 ms, 6.6 ms)
8/16-bit timer/
counter
Independent 8-bit reload timer/counter operation: 2 channels
Single 16-bit event counter (cascade connection): 1 channel
One clock selectable from four transfer clocks
(one external shift clock, three internal clocks: 0.8
µ
s, 3.2
µ
s, 12.8
µ
s)
UART
8 bits
Full-duplex double buffer
Synchronous and asynchronous data transfer
8-bit serial I/O
8 bits
LSB first/MSB first selectability
One clock selectable from four transfer clocks
(one external shift clock, three internal shift clocks: 0.8
µ
s, 3.2
µ
s, 12.8
µ
s)
8-bit A/D
converter
8-bit resolution
×
8 channels
A/D conversion mode (conversion time: 18
µ
s at 10 MHz)
Sense mode (conversion time: 5
µ
s at 10 MHz)
Continuous activation by an external activation or an internal timer capable
Reference voltage input
Real-time I/O
16-bit timer: operating clock cycle (0.4
µ
s, 0.8
µ
s, 1.6
µ
s, 3.2
µ
s)
overflow interrupt
Input capture: 16 bits
×
2 channels (External trigger edge selectability)
Output compare: 16 bits
×
2 channels
MB89663
Parameter
Part number
MB89660 Series
4
(Continued)
* : Varies with conditions such as the operating frequency. (See section "
s
Electrical Characteristics.")
s
PACKAGE AND CORRESPONDING PRODUCTS
: Available
×
: Not available
Note: For more information about each package, see section "
s
Package Dimensions."
MB89665
MB89W665
MB89P665
External interrupt
4 channels (edge selection, interrupt vector, source flag)
Rising edge/falling edge/both edges selectability
Used also for wake-up from stop/sleep mode.
(Edge detection is also permitted in stop mode.)
(Wake-up from hardware standby mode is not possible)
Standby mode
Sleep mode, stop mode, and hardware standby mode
Process
CMOS
Operating voltage*
2.2 V to 6.0 V
2.7 V to 6.0 V
Package
MB89663
MB89665
MB89P665
MB89W665
DIP-64P-M01
×
DIP-64C-A06
×
FPT-64P-M06
×
MB89663
Parameter
Part number
MB89660 Series
5
s
DIFFERENCES AMONG PRODUCTS
1. Memory Size
Before evaluating using the OTPROM (one-time PROM) product (also used for evaluation), verify its differences
from the product that will actually be used: Take particular care on the following points:
· On the MB89663, register bank from 16 to 32 cannot be used.
· On the MB89P665, address BFF0
H
to BFF6
H
comprise the option setting area, option settings can be read by
reading these addresses.
· The stack area, etc., is used.
2. Current Consumption
· When operated at low speed, the product with an OTPROM or an EPROM will consume more current than
the product with a mask ROM.
· However, the current comsumption in sleep/stop modes is the same. (For more information, see sections
"
s
Electrical Characteristics" and "
s
Example Characteristics."
3. Mask Options
Functions that can be selected as options and how to designate these options vary by the product.
Before using options check section "
s
Mask Options."
Take particular care on the following points:
· On the MB89P665, a pull-up resistor must be selected in a group of four pins for P54 to P57.
· For all products, P50 to P57 must be set to without a pull-up resistor when an A/D converter is used.
PDF 
ZIP