ChipFind - Datasheet

Part Number CX06832

Download:  PDF   ZIP
Fax Modems
Distinguishing Features
· Higher speed, lower cost fax modems
to drive emerging applications like color
fax and Internet fax
· Over 75 fax-ready solutions enable easy
feature migration to the latest fax, data
modes and voice applications
· Optimal connectivity with programmable
features, enhanced probing and symbol
rate selection along with Automatic
Rate Adaptation
· Highly integrated single chip solutions
Industry's Broadest Portfolio of Modems
Enabling Integrated Communications for
Fax Machines and MFPs
Conexant leads the industry by offering the broadest family of fax
modem products available today. Offering high performance, fully
featured fax and MFP solutions, Conexant allows OEMs to design
products for the emerging integrated communications markets.
Fax machines are undergoing a transformation to an integrated
communication resource center -- combining fax with the telephony
features expected in consumer products. Conexant's fax modem
solutions enable manufacturers to address the growing market for
fax-ready devices, from high performance office products to low-cost
consumer applications.
Conexant continues to advance fax technology with the latest
levels of performance including integrated data modes now up to
33.6 Kbps and new features such as Automatic Speech Recognition.
These innovations are driving new products both for traditional fax
applications as well as completely new consumer functions such as
Internet fax and color fax.
Today the fax market is evolving into two different classes of
devices: PC­connected multifunction peripherals and telephony-
centric resources. For decades Conexant has played an integral
role in modern data communications, and the company's chipsets
are found in the majority of the world's fax machines. This
unmatched track record in fax innovation enables Conexant to lead
collaborative efforts with manufacturers in developing new products
for years to come.
p e r s o n a l i m a g i n g p r o d u c t s
Fax Modems
FM336 V.34 High Performance
Fax Modem
End users have come to expect higher performance,
particularly higher data rates, with each new genera-
tion of fax-ready products. Conexant's new FM336
V.34 high performance fax modem amplifies this
trend with transmit and receive times up to three and
a half times faster than a 9,600 bps (V.29) fax
machine.
The high performance of 33.6 Kbps has become the
standard for office automation. Led by Conexant's
design advances, the greater speed of V.34 is
migrating downward and penetrating the low-cost
fax-enabled machines that are ideal for small and
home office (SOHO) and consumer markets.
The FM336 fax modem is the first in a family of
high-speed devices that herald the next generation
of image transmission applications such as color fax
and Internet fax.
FM336 Distinguishing Features:
· Highly integrated, 100-pin TQFP single-chip solution
· V.34 half-duplex design specifically to provide
high data rates on all types of local loops
· Automatic Rate Adaptation and symbol rate
selection to optimize throughput speed
· PLL (Phased Lock Loop) technology uses a low
crystal frequency (28.224 MHz) reducing system
cost and EMI emissions
· Data mode support (V.34) for integrated
Internet connectivity
FM209 and FM214 MONOFAXTM Modem
Conexant's MONOFAX modem family offers
the greatest level of voice and speech features
integrated into a single fax modem device available
for OEMs today. This gives customers maximum
flexibility in product differentiation while utilizing
a single-platform design to reduce product
development time and system cost, and increase
manufacturing efficiency.
The single-package 128-pin TQFP, FM209 and
FM214 devices, which support fax transmission
and reception up to 14.4 Kbps, are pin-compatible
within the product family. This single-platform
design provides OEMs the flexibility to easily
incorporate additional features including full duplex
speakerphone and Digital Telephone Answering
Machine, conversation recording and message
playback capabilities during speakerphone
operations as well as Type I and Type II Caller ID.
This fax modem family offers software compatibility
across previous, popular generations of Conexant fax
modems including EFXL, DFXL and RFX series.
FM209/FM214 Distinguishing Features:
· Choice of speeds (9.6 Kbps and 14.4 Kbps)
along with voice and speech features
· First fax modem to offer Automatic Speech
Recognition technology
· Single motherboard design by combining
popular features of previous fax modems into
one pin-to-pin compatible package
p e r s o n a l i m a g i n g p r o d u c t s
· Full duplex speakerphone and V24 digital telephone answering
machine with 24 minutes voice recording capability
· Concurrent speakerphone and digital telephone answering
machine operation
Automatic Speech Recognition
Conexant is the first to offer Automatic Speech Recognition (ASR)
in the FM209/214 MONOFAX family for applications addressing a
range of markets -- from low-end stand-alone fax machines to
high-end products. Fax machines and multifunction peripherals
are integrating more features every year to add value for the end
user. But these new functions make the keypad interface more
complicated and difficult to use. For instance, the advent of
Internet faxing will lead to larger alphanumeric keyboards and
long URLs for Internet fax addresses. Automatic Speech
Recognition can help the user operate the machine without
the complicated keyboard functions, or even remotely from
a common phoneline.
Conexant's ASR technology demonstrates high speech
recognition accuracy, as well as a flexible vocabulary for menu
functions. Possible implementations of ASR technology for fax
and MFP devices include command and control of fax functions,
managing voice calls and phoning directories, managing and
reviewing voicemail. With its value-added potential, Automatic
Speech Recognition can be used as a key differentiator for
OEMs. Moreover, a simplified, intuitive interface increases
end user satisfaction.
What is a Fax Modem?
Fax technology is diverging into two separate classes
of devices: multifunction peripherals (MFPs) and
fax phones. MFPs are fax-enabled products that are
connected to a host PC, while fax phones are the
traditional standalone fax machines. As fax technology
improves, features and capabilities that were once
found only on high-end and mid-volume machines are
migrating downward. Multiple features including
speakerphone, answering machine, Caller ID, cordless
phones and Automatic Speech Recognition will become
a part of every standalone fax machine -- evolving into
the fax-ready integrated communication resource.
Despite all the various new document-messaging
methods -- email, Internet, intranets -- market research
confirms that the fax-enabled products remain the key
communications tool in Fortune 500 and mid-size
companies. The standalone fax machine continues to
be extremely popular because of reliability, familiarity
and ease of use, universal compatibility and speed in
delivering information and generating responses.
Within a standalone fax machine, Conexant offers a
complete system solution referred to as the FaxEngineTM
-- including a fax controller and a fax modem. The fax
controller acts as the "brain" managing and directing the
appropriate processing for fax, copy, print and scan
activities. Fax modems are similar to data modems
in structure, but implement different algorithms to
optimize performance, and are governed by different
ITU standards.
Conventional fax modems support ITU V.27ter,V.29 and
V.17, while higher performance fax modems support
V.34fax. In addition, fax modems support ITU standard
V.21 Ch2 for standard G3 fax handshaking (connections)
as well as the tone generation required to complete
the handshake.
FM336 Fax Modem Features
· 2-wire half-duplex fax modem modes with
send and receive rates up to 33600 bps
­ V.34 HDX, V.17, V.29, V.27ter, and V.21 channel 2
­ Short train option in V.17 and V.27ter
· 2-wire full-duplex data modem modes
­ V.21, V.23 (75 bps TX/1200 bps RX
or 1200 bps TX/ 75 bps RX)
· PSTN session starting
­ V.8 signaling
· HDLC support at all speeds
­ Flag generation, 0-bit stuffing, ITU CRC-16
or CRC-32 calculation and generation
­ Flag detection, 0 bit deletion, ITU CRC-16
or CRC-32 detection
­ FSK flag pattern detection during
high speed receiving
· Fax supporting features
­ End of transmission indication
­ Automatic TCF Transmission
· Tone modes and features
­ Programmable single or dual tone generation
­ DTMF receive
­ Tone detection with three programmable
tone detectors
· Serial synchronous data
· Parallel synchronous data
· Automatic Rate Adaptation (ARA)
­ Fixed ARA in ROM
­ Adjustable ARA in RAM
· TTL and CMOS compatible DTE interface
­ ITU-T V.24 (EIA/TIA-232-E) (data/control)
­ Microprocessor bus (data/configuration/control)
· Receive dynamic range: 0 dBm to -43 dBm
(V.17, V.29, V.27) and -9 dBm to -43 dBm (V.34)
· Programmable turn-on and turn-off thresholds
· Programmable transmit level: 0 to -15 dBm
· Switchable compromise equalizer in
non-V.34 modes
· Adjustable speaker output to monitor
received signal
· DMA support interrupt lines
· Two 16-byte FIFO data buffers for burst
data transfer with programmable extension
of up to 255 bytes
· NRZI encoding/decoding
· Diagnostic capability
· +5V/+3.3V operation
· Typical power consumption:
­ Normal mode: 700 mW
­ Sleep mode: 65 mW
· 100-pin TQFP package
FM209/214 MONOFAXTM
Modems Features
· Group 3 facsimile transmission/reception
­ ITU-T V.17 and V.33 (FM214 models)
­ ITU-T V.29, V.27ter, T.30, V.21 Channel 2, T.4
­ ITU-T V.17 and V.27ter short train
­ HDLC framing at all speeds
­ Receive dynamic range: 0 dBm to -43 dBm
­ Automatic adaptive equalization
­ Fixed and programmable digital
compromise equalization
­ DTMF transmission and detection
­ ITU-T V.21 Channel 2 FSK 7E Flag Detect
­ Ring detector
­ Programmable transmit level
­ Programmable single/dual tone transmission
· Voice codec (-V Option)
­ 24 minutes of voice storage per 4 Mbit memory
­ Near toll quality voice recording and playback
­ Programmable AGCs
­ Programmable line/microphone input and
line/speaker output filters
­ Error correction coding allows ARAM usage
­ Pitch synchronized fast and slow playback
­ Near-end echo cancellation
· ADPCM audio codec (-V Option)
­ High fidelity recording and playback
of audio signals
­ 32 Kbps and 24 Kbps
­ Programmable AGCs
­ Programmable line/microphone input and
line/speaker output filters
­ Near-end echo cancellation
· PCM audio codec
­ 128 Kbps and 64 Kbps
­ DTMF detect and tone detect
­ Type II Caller ID CAS detection
­ Near end echo cancellation
· Full duplex speakerphone (-S Option)
­ Acoustic echo cancellation
­ Line echo cancellation or secondary acoustic
echo cancellation
­ Programmable microphone and speaker AGCs
­ Programmable line and speaker output filters
­ Microphone and speaker volume control
and muting
­ Auto fallback toward pseudo-duplex operation
under poor operating conditions
­ Programmable handset echo simulation in
handset operation
­ High gain half-duplex mode
­ Intercom support
­ Two dual tone transmitters
­ Conversation recording and message playback
with Voice or ADPCM audio codec (-VS option)
· Type II Caller ID CAS detection
· Automatic Speech Recognition (-R Option)
­ Speaker Dependent (SD) and Speaker
Independent (SI) isolated word recognition
­ SI Vocabulary (English) for hands-free voice
control of dialing, telephone answering machine
and fax functions
­ Active word list for recognition selected
by host controller
­ Supports speech input from microphone,
local handset, or telephone line
­ SI word models trained off-line and stored in
DSP ROM
­ SD word models trained in real-time, stored in
(off-chip) NVRAM and downloaded to DSP RAM
­ Supports up to 30 Active simultaneous SD words
­ SD training ­ single utterance or
multiple utterances
­ 2.5 second maximum speech length for
SD training
­ Rejection capability provided for SI mode
· Room monitor
­ Near end echo cancellation
­ Monitor recording and message playback with
Voice or Audio codec (-V option)
· V.23 and Type I Caller ID
· Interface Memory Interrupt
· Eight general purpose input (GPI) and eight general
purpose output (GPO) pins for host assignment
· DTE Interface: two alternate ports
­ Selectable microprocessor bus (6500 or 8085)
­ ITU-T V.24 (EIA/TIA-232-E compatible) interface
· TTL and CMOS compatible
· 3.3V/5V operation
· Packaging
­ 128-pin TQFP (thin quad flat pack)
f e a t u r e s a n d s p e c i f i c a t i o n s
Further Information
literature@conexant.com
1-800-854-8099 (North America)
33-14-906-3980 (International)
Order # xxxxxx
98-5929
Personal Imaging
Printed in USA
World Headquarters
Conexant Systems, Inc.
4311 Jamboree Road
P. O. Box C
Newport Beach, CA
92658-8902
Phone: (949) 483-4600
Fax: (949) 483-6375
U.S. Florida/South America
Phone: (727) 799-8406
Fax: (727) 799-8306
U.S. Los Angeles
Phone: (805) 376-0559
Fax: (805) 376-8180
U.S. Mid-Atlantic
Phone: (215) 244-6784
Fax: (215) 244-9292
U.S. North Central
Phone: (630) 773-3454
Fax: (630) 773-3907
U.S. Northeast
Phone: (978) 692-7660
Fax: (978) 692-8185
U.S. Northwest/Pacific West
Phone: (408) 249-9696
Fax: (408) 249-7113
U.S. South Central
Phone: (972) 733-0723
Fax: (972) 407-0639
U.S. Southeast
Phone: (919) 858-9110
Fax: (919) 858-8669
U.S. Southwest
Phone: (949) 483-9119
Fax: (949) 483-9090
APAC Headquarters
Conexant Systems Singapore,
Pte. Ltd.
1 Kim Seng Promenade
Great World City
#09-01 East Tower
Singapore 237994
Phone: (65) 737 7355
Fax: (65) 737 9077
Australia
Phone: (61 2) 9869 4088
Fax: (61 2) 9869 4077
China
Phone: (86 2) 6361 2515
Fax: (86 2) 6361 2516
Hong Kong
Phone: (852) 2827 0181
Fax: (852) 2827 6488
India
Phone: (91 11) 692 4780
Fax: (91 11) 692 4712
Korea
Phone: (82 2) 565 2880
Fax: (82 2) 565 1440
Europe Headquarters
Conexant Systems France
Les Taissounieres B1
1681 Route des Dolines
BP 283
06905 Sophia Antipolis Cedex
France
Phone: (33 4) 93 00 33 35
Fax: (33 4) 93 00 33 03
Europe Central
Phone: (49 89) 829 1320
Fax: (49 89) 834 2734
Europe Mediterranean
Phone: (39 02) 9317 9911
Fax: (39 02) 9317 9913
Europe North
Phone: (44 1344) 486 444
Fax: (44 1344) 486 555
Europe South
Phone: (33 1) 41 44 36 50
Fax: (33 1) 41 44 36 90
Middle East Headquarters
Conexant Systems
Commercial (Israel) Ltd.
P. O. Box 12660
Herzlia 46733, Israel
Phone: (972 9) 952 4064
Fax: (972 9) 951 3924
Japan Headquarters
Conexant Systems Japan Co., Ltd.
Shimomoto Building
1-46-3 Hatsudai,
Shibuya-ku,Tokyo
151-0061 Japan
Phone: (81 3) 5371-1567
Fax: (81 3) 5371-1501
Taiwan Headquarters
Conexant Systems,Taiwan Co., Ltd.
Room 2808
International Trade Building
333 Keelung Road, Section 1
Taipei 110,Taiwan, ROC
Phone: (886 2) 2720 0282
Fax: (886 2) 2757 6760
www.conexant.com
Conexant and the Conexant symbol are trademarks of Conexant Systems, Inc.